Tripp Lite's SMART1200XLHG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides up to 28 minutes of runtime for a half load or 10 minutes for a full load, so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to normal 120V nominal output without drawing battery power. The SMART1200XLHG's built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise, while maintaining full AC surge suppression in all modes. This UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA 5-15P-HG plug with a six-foot cord for flexibility in placement. All four outlets provide both backup protection and surge protection rated to 940 joules. The SMART1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite's included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.
Ideal UPS Backup in Healthcare Facilities
- Complies with UL 60601-1 standards for use in patient-care facilities
 - Isolation transformer with Faraday shield offers full isolation and removes common mode noise
 - 6 ft. power cord with 120V NEMA 5-15P-HG plug
 - Floating AC output prevents noise coupling and meets agency requirements for isolation
 
Reliable Battery Backup and Surge Protection
- Supports half load up to 28 min. and full load up to 10 min.
 - 4 NEMA 5-15R-HG outlets with 940-joule surge protection
 - Filters out disruptive EMI/RFI line noise that can cause equipment damage or data loss
 - Resists electrostatic discharge
 
LEDs and Audible Alarms
- Front LEDs indicate power, mode, load and battery status
 - Alarms alert you to power failure, overload and low battery
 - Mute/quiet mode ideal for use in quiet patient-care vicinities
 
Saves Files When You're Away
- Included PowerAlert® software enables safe, unattended system shutdown and file saving during power failures
 - Connects to computer via DB9 or USB port with included cables
 
- General Information
 - Manufacturer
 - Eaton Corporation
 
- Manufacturer Website Address
 - http://www.eaton.com
 
- Brand Name
 - Tripp Lite series
 
- Product Line
 - SmartPro
 
- Product Type
 - Line-interactive UPS
 
- Warranty
 - Limited Warranty
 - 2 Year
 
- Technical Information
 - Plug/Connector Type
 - NEMA 5-15P
 
- Receptacle Type
 - NEMA 5-15R
 
- Receptacle Detail
 - 4 x NEMA 5-15R
 
- Cord Length
 - 6 ft
 
- Transfer Time
 - 4 ms
 
- Power Description
 - Load Capacity (VA)
 - 1000 VA
 
- Load Capacity (Watt)
 - 750 W
 
- Input Voltage
 - 120 V AC
 
- Output Voltage
 - 115 V AC
 
- 120 V AC
 
- Management
 - Network Management
 - SNMP Manageable
 
- Alarm
 - On Battery
 
- Overload
 
- Low Battery
 
- Controls/Indicators
 - Status Indicators
 - Includes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning
 
- Interfaces/Ports
 - USB
 - Yes
 
- Battery Information
 - Battery Chemistry
 - Lead Acid
 
- Backup/Run Time (Full Load)
 - 10 Minute
 
- Backup/Run Time (Half Load)
 - 28 Minute
 
- Battery Life
 - 6 Year
 
- Typical Battery Recharge Time
 - 4 Hour
 
- Hot Swappable
 - Yes
 
- Environmental Conditions
 - Maximum Operating Temperature
 - 104°F (40°C)
 
- Physical Characteristics
 - Height
 - 12.8"
 
- Width
 - 7.5"
 
- Depth
 - 9"
 
- Form Factor
 - Tower
 
- Weight (Approximate)
 - 44.60 lb
 
- Miscellaneous
 - Package Contents
 - SmartPro 1200XLHG UPS
 - SMART 1200XLHG Medical Grade Tower UPS System
 - PowerAlert Software and cabling
 - Warranty information
 - Instruction manual
 
- Additional Information
 - Ideal UPS protection for applications in medical patient-care areas where UL 2601-1 listed medical electrical equipment is required
 - Maintains less than 300 microamps leakage current for UPS and all connected equipment
 - Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
 - Provides connected equipment with continuous power during short and long duration loss of commercial power
 - Expandable runtime is available with the addition of one or more external battery packs (part# BP36V27)
 - Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power
 - Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
 - Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
 - Resistant to electrostatic discharge
 - Supports loads up to 1000VA / 750 watts
 - 34 minutes half load runtime (500VA/375 watts), 16 minutes full load runtime (1000VA/750 watts)
 - 4 protected hospital-grade outlets; 6-ft. cord
 - 1-RS-232 and 1-USB serial port for network interface; SNMP compatible
 - SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory
 - Complete surge protection, line isolation and EMI/RFI noise filtering
 - 2 year product warranty
 - PowerAlert unattended shutdown software and complete cabling included
 - 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
 - Battery replacement door
 - Back panel grounding lug
 
- Certifications & Standards
 - UL1778 (USA, Series AGSM1200PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications
 
- Country of Origin
 - Taiwan